Not Just a shed!
Our Sheds are all made in house. From roof to the floor and everything in between. Each shed we built is for that customer. So if you can't see a style you are after, we may have already done it and got a photo. We just have too many to post!! If you would like a quote on a bespoke size and style. Please drop us an email.
Previously installed buildings
An internal division means this building has been split into two but under one roof. Is this what you are after?
This building is on the borderline of recommendations for Metal Box Profile Sheets on the roof as well as mineral felt. this has our Deluxe shiplap where the finishing touches are slightly different to the other style that is standard.
We only recommend Metal Box Profile Sheets on buildings we know that will have issues sooner than our other buildings. But you can opt to choose to have the sheets on any sized roof if you wish to reduce the maintenance going forward.
9' Front 7' Deep Who wants a normal shed style anyway?
Windows offset to the left with door on the right is an option
Door on the Apex 6' side. Windows on the 8' Side.
Pent shed with a door offset with a thinner window to fit.
8' front shed
A 7' x 7' Pent Corner Shed with double doors
Design Specification Overview
Floor
Tanalised 35 x 45mm Rafters
19mm Floorboards
Roof
35 x 45mm rafters
T&G
Green Mineral Felt
Batons to secure the felt on sides and on each rafter along the roof to ensure the felt is held securely.
​
Walls
35 x 45mm rafters
Our own design 19mm shiplap overlapping by approximately 18mm as standard or the option of our Deluxe Shiplap. As pictured on the 12' x 8' Pent above.
​
Additional options of:
Additional Doors, Double Doors
More Windows, or fancier windows!
Metal Box Profile sheets on the roof with guttering.
​​
​
APEX:
The internal and external heights on an apex building will vary depending on the size of the building, the heights below are based on an average 6' x 4' (1829mm x1219mm), 7' x 5'(2133mm x 1524mm) shed.
Internal:
Eves: 5'10"
Centre: 6'9"
External:
Eves: 6'4"
Centre: 7'3"
PENT:
On most pent sheds the fall on the roof is roughly 6", again this can vary, the heights below are based on an average 6' x 4' (1829mm x1219mm), 7' x 5'(2133mm x 1524mm) shed.
Internal:
Highest Point: 6'6"
Lowest Point: 6'0"
External:
Highest Point: 7'0"
Lowest Point: 6'6"
​
​
